Razvan S.

Da, toata lumea o face diferit. (no offense, dar eu consider ca daca esti platit pt asemenea operatiuni de catre alti oameni, esti indreptatit sa tii metodele specifice descoperite de tine, doar pentru tine; dar asta e doar opinia mea, si mi-o tin) Regula generala e, aproape sa se oglindeasca totul in fretwire / sau la o poza cu blitz facuta din lateral, reflexia sa se vada cat mai aproape de ''o gaura neagra'' , pe cat posibil fara urme vizibile de orice mini scraping/zigzag stuff (inclusiv in ''laterale'') -> Buttery smooth feel achieved Spor la frecat Exemple partiale de la mine pe chitara cuiva: Red -> No Blue-> Yes Sau indepartare de tarnish extrem pe fretwire ce nu a fost vreodata intretinut(bass Warwick cu fretwire de alama) , cu substante chimice (nu ce se gaseste guitar related):

Am fost si eu tentat cand aveam Steinberger. Probabil merita incercat, why not

Vemuram Jan Ray Clone - 118th pedal built Setup + fretwire sanding/polish + fretboardclean, on a Cort hollowbody guitar (the nut did not need any intervention to the slots, which rarely happens ) Squier Bullet Strat Setup

117th pedal built Z Vex Box Of Rock clone

Oricum nu o sa fie 1:1 fit, si va trebui sa mergi la un lutier sau ceva, sa ti-l ajusteze si sa refaca radiusul la slots.

* Restrung and solved some stuff on a Fender Jimmy Dale acoustic guitar: - the input jack fell in the body and there was no way to reinsert it back by hand as the body is very slim and you can't reach the hole; I had to be creative and take it out using a jack and some wire and add light in the guitar body hah! but I solved it; - the owner wanted to add a locking strap pin, and I did that too, right next to the old one (that is on the input jack); - restrung the guitar (no setup was needed, as he didn't request it, but the guitar was OK nevertheless as it was previously setup at some point, and I used the same gauge) * Ibanez S420 Setup + Pickups Swapped + Fretboard Cleaned - I also redid some solder points, and took out some wires that were unnecessary and long * Ibanez RG3XXV (setup+fretboard cleaning) * Ibanez RG350DX (setup+pup swap&rewiring+fretboard clean) - also had to sand down and refinish a fretwire (last one), because there was a nasty indentation in it that was very noticeable while playing; (it looked like a thin string was pressed against it very hard, making a knife like narrow groove) - cleaned the pots prior to redoing the wiring

@Fllockas - warn si ban 30 de zile - al 3-lea warn deja de Topic Bumping

* Finished my second JHS Morning Glory clone. One of my fav pedals, and sounding good as always * Setup on a Jackson JS32 Natural Finish Sanded some fretwires+ cleaned/polished them + sanded down the trem cover because for some reason it did not originally fit haha, and one of the neck screws did not go all the way in, had to drill a little more into the neck. On this particular guitar, the neck was a little too deep into the neck pocket IMO, and the angle was a little weird, so I added a shim. Plays great now, with good action.

@man68 warn si ban 30 de zile - up-uri constante in aceiasi zi Please read rules. Thanks!

Nu cred ca am blocat in viata mea un trem....sigur n-o sa fac asta pe chitara asta so...Imma go with: Yes (ma mir ca m-ai intrebat asa ceva haha)

Am asamblat gatul sa imi fac o idee. Mai astept doar 2-3 elemente (un switch, un nut, un plate) si pot sa ma apuc de wiring. Va fi similar cu acesta Niste poze cu before after si ce am mai modificat eu la pickguard sa fie pt Floyd + nut-ul vechi( scos si replaced, cu mare atentie )

* Just finished a Mad Prof. Snow White AutoWah clone (for the same person for whom I did 4 other pedals previous to this),and it's absolutely great! Doesn't alter the tone at all, and it's very touch sensitive (I did some mods for that). Cool pedal! Really useful if you don't want a classic wah. This would be my 115th pedal built!

*Cornish G-2 Clone (buffered) (113th pedal built) * Dan Armstrong Blue Clipper Clone (114th pedal built) * Modded a GCB95 wah that had a different pot than stock, and other issues. I mounted a proper Hot Potz II pot, modded it for Bass(the owner plays bass), and also did a true bypass on it(removed the buffer), and some other mods as well. It's great now! * Setup on an old Aria Pro 2 electric and some fretboard cleaning ; Also adjusted some fretwires that were sticking out and stuff * Adjusted the nut on an Ibanez acoustic Very nice low action now * Fixed an Ibanez bass combo * I rewired one of my Charvel Model 4's from 87, but I ultimately sold it. I actually did the wiring basically for the customer , with new pots and everything. It was a MESS before haha! * Changed the filter caps in a Marshall JCM900 and changed the power tubes and rebiased+pot cleaning. This is the 5881 version (Biased at 37.7 mA <0.7*(25/464V) * 1000>) * Cleaned a BOSS GT-6 and also changed some switches * Made a Boss GE-7 a little less noisy * I did some precise sanding adjustments to turn a custom 1:1 US strat pickguard copy made from quality acrylic , to fit the Schaller F style trem. You can see before and after pics :) * An Epiphone Custom Pro LP came in for some severe oscillations coming from the bridge pickup(an aftermarket DiMarzio was installed previously by someone else) Ultimately I took off the cover and got rid of the problem to some extent (did that to the neck also, so that it would be aesthetically pleasing). It will most likely come back at some point for a rewiring, as I noticed it wasn't that good, and possibly the additional issues come from the whole wiring. * Peavey VK100 Retube + Oscilloscope Bias Check + Internal Trimmer

Ceva US strat project ce l-am inceput, inca astept necku (US maple compound radius 22 fret )si some other parts (superswitch fender, etc, dinastea). Corpu e un 2017 Professional US strat, restu, numa goodness. Schema va fi interesanta (fiind cu 5 way superswitch, S1 switch, push pull CTS, etc) Cheitele nu necesita screw drilling, tremu e Schaller(comandat direct de la ei, nu am gasit variant de 42mm block niciunde pe black haha). Pickguardu e din acrylic facut 1:1 in US dupa unul stock. Termin eu...candva

Multumesc mult de aprecieri!

* Changed the LPAD in a Warwick Bass Cab, and also the Tweeter Protection Lamp * Did some checkups in a Tech21 Trademark 300 head and also repair the footswitch that was causing problems * Nut change in a Westone Spectrum and a BC Rich ST-3 * A cool rack delay came in; not working, will debug. * A VOX AC30 (1979) Full Recap and some maintenance. Some before and after: * Swapped the FSW in a homemade booster (not mine) Good soldering as always from my side anyway * I had a Wah modified into an Expression pedal(owner's request). It has its limitations because of the pedal action, but works for simpler things. * Finished a Cornish SS-2 clone for someone. A G-2 will be up next (same person) Has the Cornish Buffer also. Great sounding pedal!

Sincer, haven't asked so , dar I will.

Da man, sigur...o sa imi dea detaliat exact ce au aplicat pe corzi sau ce au facut din start, sa stie toata lumea ..what? Momentan sunt curios sa testez, nu procesul lor care ma gandesc ca nu doresc sa il dea in stanga si in dreapta, for commercial reasons Unii uita ca singurul system (din cate tin eu minte), care mentine asa tuningul, este vechiul trans trem de pe Steinbergers...so niste corzi care fac asta, singure , nedepinzand de sistem...e un uber bonus for me si cred ca si ei realizeaza asta.

Am vorbit cu omul, cand scoate varianta comerciala sa ma anunte, asa ca sunt pe lista. Daca reusesc sa fac rost, fac un review I-am sugerat (ca si altii vad ca haha), daca devine ceva serios sa ia contact cu Elixir, sa implementeze ideea asta cu ei. O sa fie the best strings evaaaaaahhhh

Poftim...?

VOX 1979 Morris Top Boost (am facut un Recap total si tube swap; unii condensatori se dezintegrau efectiv la atingere + electrolitici super off ca valori; nu avea mains switch, dirty as hell,etc) Ampul suna exemplar, nu puteam sa ii dau blana ca o faceam (am facut si un video rapid)

Deci fix chestia asta "aliaj bineinteles fara plumb , ca sa pot dezlipi o componenta trebuie sa refac lipitura cu aliaj care contine plumb ," ma dispera maxim haha. E asa de nasol de incalzit...si de refacut, si in procesul asta risti exfolierea. Uneori stau sa ma gandesc daca nu cumva un pistol cu aer cald ar fi mai bun pentru asa ceva, concentrata fix pe lipitura aia, in loc de varf de letcon.

Super fain, o sa revin si eu cu diverse cand apuc. Un SOLTON GV60, un Vox AC30 1979, un Marshall JCM2000 (bleah ) , Un Laney GH100L (iar, bleah), Peavey 6534+(again, bleah placa) Dezamagitor ce placi au unele...ce lipituri...cu that shit RoHS crap(In Laney). I hate it. Made in UK, Made in USA...si arata worse than Bugera China.

Mai unu: stfu ratz

Asta inseamna sa fii creativ, si sa insisti, si sa arati lumii ca ai real issues E greu sa pricepi ca n-ai voie sa ai cont duplicat...si ca iei ban dupa de fiecare daca cand esti prins. Dar e ok. răzvănelînfășețel BAN - clona răzvănușdeplușbengoscusos , TheOnlyKtulu, GuessWhoBeach, razvan.ass