* Some repairs in a Trace Elliot AH250 (had some capacitors way out of spec on the preamp side and I also checked other stuff). Also reapplied thermal paste on the power section. Will see if it comes back at some point or not
* A Crown XLS 5000 came in because one channel was not working. At the end it just required some dust removal and contact cleaner. Solid built stuff ( I think it was featured at the NAMM 2008 show)
* A Fender M-80 combo came in for a checkup and cleanup. Surprisingly decent distortion on this SS amp.
* An Ibanez RG450 came in for some general maintenance (belongs to @apocapsile)
-painted some screws
-rewired with different DiMarzios and a Superswitch
-setup
-removed that fretwire grindy feel + polished them
-refitted the inserts (came out easily) + new studs
-resharpened the trem knives and painted them
* Another EP Booster Modded clone (120th pedal built)
This time I used a custom finish on the enclosure(had it for myself but the customer liked it and I used it on his project).
Volume Boost, Tone Cut, 3 way bass switch, 9V->18V internal
* An Ibanez RG721 came in for some tinkering (belongs to @Crisan Darius_28146)
-made a general rewiring, cleaning all the parts prior to this
-the bridge humbucker had one dead coil unfortunately -> mounted a Seymour Duncan TB-6 Distortion
-setup + fretboard and fretwire cleaning
* An Epiphone SG Special came if for some general work:
-swapped the bridge humbucker (which I had to modify with longer wires as they were previously cut short and also custom fabricate some new ears, because the screw holes were stripped)
-also mounted a new input jack because the old one was faulty
-setup with some nut adjustments
-fretwire made shiny and the grindy feeling is now gone
* A Hughes & Kettner Coreblade head came in for a problem regarding the fact that the filaments weren't lighting up on the tubes. (belongs to @LumpY)
I explored everything and found some cold/cracked solder points.
Works great now
* A Romanian Madrigal strat came back for a rewiring. (belongs to @bogdan)
I also mounted a split switch for both the DiMarzio DP151 Paf Pro in the bridge and the neck DiMarzio DP217 HS4 (Malmsteen model one).
I actually like the HS4 in the true single coil mode much more.
* A Squier Bass came in for a setup + some fretwire cleaning and I also fixed a strap button which was coming out.
This Bass was in my hands before but it only required a very fast intonation, setup was ok. In the meantime the customer installed much thicker strings without a proper setup, and went back to another set, so it had to be redone.