www.rgc.ro Web analytics

Jump to content
AnalogSound

IPSS un modul programabil de comanda pentru aplicatii de switching

Recommended Posts

Un proiect la care lucrez de ceva vreme. O placa universala si extrem de configurabila (cred ca acopera cam toate scenariile posibile) - sper ca nu va deranjeaza descrierea in engleza dar nu mai am puterea sa o fac si in romana

 

Technical specifications:
- 8 inputs for switches
- 8 outputs that can supply up to 150mA (each)
- can accept DC or AC as supply voltage (between 6V and 12V DC or AC)
- MIDI IN / OUT / THROUGH (buffered)
- Mute output port for MUTE before switch
- Optional LCD output
- 8 status outputs (can supply LEDs for example)

Configuration specifications:
- For each MIDI PC message can be assigned a combination of active outputs (relays)
- For each of the 8 INPUTS can be assigned a combination of active outputs (relays)
- For each of the 8 INPUTS a maximum of 16 characters name can be assigned (visible on the optional LCD)
- For each of the 8 OUTPUTS can be assigned a MIDI CC number (CC value grater than 0 would activate the output / a CC with a value of 0 would deactivate the output)
- Configurable pre-mute delay and mute delay (each with its own values)
- MIDI channel can be freely configured
- For each of the 8 inputs a MIDI PC message can be assigned to be sent when the input is activated also, a different channel can be assigned for the MIDI PC messages sent by the foot-switches
- In case of not using the MIDI PC send feature, this can be deactivated
- Each of the 8 OUTPUTS can be configured pe be a momentary latch with a custom time between 0 and 255ms (1/4 of a sec)

Utility specifications:
- The ability to erase the board via GUI and reset it to factory defaults
- The ability to save the current configuration of the board
- The ability to restore the saved configuration of the board (for example in case that many boards needs to be configured with the same features)
- Firmware update section - for updating the running firmware of the board or to upload custom firmware (available by request)

All the configuration features are available via a computer GUI (compatible with Windows XP, Windows 7 and Windows 10 / 64 and 32 bits)

Package will be delivered with the control board, programming interface and instructions to download the GUI programming application.

 

 

68463092_2434967203404285_8688355210696851456_o.jpg

69207357_2434967136737625_5374811280685137920_o.jpg

68780109_2432945796939759_3641016700792471552_o.jpg

68454377_2432945820273090_7824988654450769920_n.jpg

  • Like 3
  • Thanks 1

Share this post


Link to post
Share on other sites
17 minutes ago, boc said:

Aplicatia de configurare poate fii facuta sa functioneze si pe linux sau web?

Aplicatia la momentul actual ruleaza doar pe Windows - pe web nu cred ca are cum sa functioneze deoarece are nevoie sa acceseze portul Serial pe care il creaza interfata de configurare - deci web din cate stiu este exclus.
Pe Linux nu este dezvoltata inca dar cred ca in WINE poate sa functioneze insa NU este testata.

  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

×

Important Information

"This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies.