Am folosit acasa, este ca nou fara nici un defect.
Free field frequency response ±6 dB
17 … 600 Hz
Free field frequency response ±3 dB
18 … 300 Hz
Reproduction accuracy between 50 Hz and 100 Hz: 100%, 80%, 50% of subwoofers produced
±1.20; ±0.54; ±0.28 dB
Self-generated noise at 10 cm (with input gain set to 100 dB SPL for 0 dBu)
<20 dB(A) SPL
Sine wave output with a THD < 0.5 % at 1 m in half space
95 dB SPL (>45 Hz)
Bass capability: Max. SPL in half space at 3% THD at 1m (averaged between 50 Hz and 100 Hz)
110.7 dB SPL
Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single / pair full range)
112 dB SPL
Analog input(s)
2 x XLR: analog electronically balanced
Analog input impedance
>13k Ohms
Max. input level
+24 dBu
Common mode rejection ratio (CMRR)
> 56 dB @ 15 kHz
Crosstalk (1 kHz), level matching
-95 dB; ±0.1 dB
Volume control
NRC 1 hardware remote or RS-232
Volume control range; resolution
118 dB; 0.25 dB
Analog dynamic range; THD+N
119 dB(A); <0.001% (-100 dB)
Signal routing modes
Right; LFE 120 Hz; Wide; Daisy-chain
LFE Gain
0 / +10 dB
Analog output(s)
3 x XLR; analog electronically balanced
Input gain control (sensitivity)
+2 ... -12 dB
Output level control (output level in 1 m based on 0 dBu input level)
100; 114 dB SPL
Controller design
Analog, active
Crossover frequency
80 Hz
Crossover slope
24 dB/oct; 4th order
Equalization: Low cut
30 Hz; 0 … -12 dB
Equalization: Parametric EQ: Gain
+4 ... -12 dB
Equalization: Parametric EQ: Frequency
Bypass; 20 ... 120 Hz
Equalization: Parametric EQ: Q
1 ... 8
Phase
0; 45; 90; 135 and 0/180 deg
Protection circuitry
Peak and thermo limiters
Infrasonic filter: frequency; slope
6.5 Hz; 12 dB/oct.
Remote control
Bass management on/off via a standard foot switch (optional) on a 6.3 mm jack
Display: On; Normal Operation
Green LED
Display: Limit / Clip / Errors / Protection /Boot Mute / Shut Down Mute
Red LED
Display: Bass Management on
Green LED
Output power woofer amplifier (THD+N with limiter deactivated: 10%)
200 W
Output power woofer amplifier (THD+N with limiter deactivated: 0.1%)
160 W
Mains Power Supply: input voltage; frequency
220-240 / 100-120 V (switchable); 50/60 Hz
Power consumption (230 V / 100 V): Idle
14 W
Power consumption (230 V / 100 V): Full output
280 W
Cabinet material
Wood cabinet, aluminum electronics panel
Cabinet surface finish; color (front / back)
Painted; metallic anthracite (RAL 7021) / black (RAL 9005)
Operating conditions
+10° C to +40° C (+50° F to +104° F); <90% RH, non-condensing
Transport/storage conditions
-25° C to +70° C (-13° F to 158° F); <90% RH; non-condensing
Woofer
265 mm (10") with magnetic shielding and protecting black metal grille
Product dimensions (height x width x depth)
360 x 330 x 645 mm (14.2" x 13" x 25.4")
External net volume
76.6 liters
Product weight
26 kg (57 lbs 5 oz)
Cabinet weight when electronics remote located
24.2 kg (53 lbs 6 oz)
Packed dimensions (height x width x depth), mm (inches)
515 x 490 x 750 mm (20 1/4" x 19 1/4" x 29 1/2")
Packed weight
32.0 kg (70 lbs 9 oz)
Packed cube
0.189 m³