andrei_tu Posted August 8, 2013 Posted August 8, 2013 (edited) E-MU 1616m PCI Placa are tot ceea ce contine pachetul original cu CD-uri si soft-uri. Multumesc Specificatii: General Sample Rates: 44.1, 48, 88.2, 96, 176.4, 192kHz from internal crystal or externally supplied clock (no sample rate conversion) Bit Depths: 24 bit I/O, 32 bit processing E-MU E-DSP 32-bit DSP with 67-bit accumulator (double precision w/ 3 headroom bits) Hardware-accelerated, 32 channel mixing, and multi-effects processing Zero-latency direct hardware monitoring w/effects ASIO2, WDM/MME/DirectSound, x64 Drivers EDI (E-MU Digital Interface) proprietary 64 channel audio link over CAT-5 cable Anti-Pop speaker protection minimizes noise during power on/off Ultra-low jitter clock subsystem: < 1ns in PLL mode (44.1kHz, Opt. S/PDIF Sync) Analog Line Inputs (4) Type: servo-balanced, DC-coupled, low-noise input circuitry A/D converter: AK5394A Level (software selectable): Professional: +4dBu nominal, 20dBu max (balanced) Consumer: -10dBV nominal, 6dBV max (unbalanced) Frequency Response (20Hz-20kHz): +0.0/-.03dB Dynamic Range (1kHz, A-weighted): 120dB Signal-to-Noise Ratio (A-weighted): 120dB THD+N (1kHz at -1dBFS): -110dB (.0003%) Stereo Crosstalk (1kHz at -1dBFS): < -120dB Analog Line Outputs (6) Type: balanced, AC-coupled, 2-pole low-pass differential filter D/A converter: CS4398 Level (software selectable): Professional: +4dBu nominal, 20dBu max (balanced) Consumer: -10dBV nominal, 6dBV max (unbalanced) Frequency Response (20Hz - 20kHz): 0.0/-.06dB Dynamic Range (1kHz, A-weighted): 120dB Signal-to-Noise Ratio (A-weighted): 120dB THD+N (1kHz at -1dBFS): -105dB (.0006%) Stereo Crosstalk (1kHz at -1dBFS): < -115dB Combo Microphone Preamplifier/Hi-Z/Line Inputs (2) Type: E-MU XTC combo mic preamp and Hi-Z/line input w/ Soft Limiter Gain Range: +60dB Frequency Response (min gain, 20Hz-20kHz): +0.0/-0.1dB Stereo Crosstalk (1kHz min gain, -1dBFS): < -125dB Hi-Z Line Input: Input Impedance: 1Mohm Max Level: +18dBV (20.2dBu) Dynamic Range (A-weighted, 1kHz, min gain): 118dB Signal-to-Noise Ratio (A-weighted, min gain): 118dB THD+N (1kHz at -1dBFS, min gain): -105dB (.0006%) Microphone Preamplifier: Input Impedance: 1.5Kohms Max Level: +6dBV (+8.2dBu) EIN (20Hz-20kHz, 150ohm, unweighted): -129.5dBu Signal-to-Noise Ratio (A-weighted, min gain): 119dB THD+N (1kHz at -1dBFS, min gain): -110dB (.0003%) Phantom Power: 48V Soft Limiter: 5dB max compression (software selectable) Edited August 8, 2013 by andrei_tu
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now