Eroare La Procesor !

[Magic Mushroom]

Salutare

 

Am un digitech rp 250 si tocmai i-am dat reset.. si acum nu mai merge pedala de expresie.. si nu reusesc nicicum sa o fac sa mearga. Daca vreunul dintre voi a avut aceasi problema, va rog sa ma ajutati .. Multumesc

[Magic Mushroom]

Salutare

 

Am un digitech rp 250 si tocmai i-am dat reset.. si acum nu mai merge pedala de expresie.. si nu reusesc nicicum sa o fac sa mearga. Daca vreunul dintre voi a avut aceasi problema, va rog sa ma ajutati .. Multumesc

 

S-A REZOLVAT ! Aici sunt instructiuni pentru cei care mai patzesc asta :

 

You will have to recalibrate your pedal. If you don't have your manual anymore try going to www.digitech.com. The procedure for the RP350 so that you don't lose your presets is : 1. Press and hold the UP/DOWN Footswitches until PDLCAL appears in the display (BYPASS,TUNER and EXIT will be displayed before PDLCAL is accessed after about 5 seconds). 2. When the display prompts you with TOEDN, rock the EXPESSION PEDAL forward (toe down) and press either FOOTSWITCH.

3. When the Display prompts you with TOE UP, rock the EXPRESSION PEDAL back (toe up ) and press either FOOTSWITCH.

4. The Display now prompts you to calibrate the V-Switch sensitivity (VSWxxx), where xxx is the current V-switch threshold. Rock the EXPRESSION PEDAL forward and press firmly on the toe once to turn the V-switch on (WAH ON) and again to turn the V-switch off (WAH OFF).

5. If the V-switch is too sensitive, press the right UP FOOTSWITCH to raise the threshold (range is 0-2000. Keep testing the V-switch sensitivity and adjust the threshold until it only engages when you want it to ( too sensitive a setting will lead to the V-switch falsely triggering on or off when using the Expression Pedal).

6.When the V-switch sensitivity is set to your satisfaction, press both UP/DOWN FOOTSWITCHES simultaneously to exit. NOTE: IF the DISPLAY shows ERROR, an error has occurred and steps 2 through 5 should be repeated. Sorry fo the caps but thats how the instructions appear in my sons manual. You can also dowload the manual and an editor librarian (for the 350 at least) at their site. They might even have an update for your pedal. Hope this helps. Keep playing.