www.rgc.ro Web analytics

Jump to content

E-Mu 1616M Pci


Recommended Posts

E-MU 1616m PCI

 

Placa are tot ceea ce contine pachetul original cu CD-uri si soft-uri.

Multumesc

 

Specificatii:

 

General

Sample Rates: 44.1, 48, 88.2, 96, 176.4, 192kHz from internal crystal or externally supplied clock (no sample rate conversion)

Bit Depths: 24 bit I/O, 32 bit processing

 

E-MU E-DSP 32-bit DSP with 67-bit accumulator (double precision w/ 3 headroom bits)

Hardware-accelerated, 32 channel mixing, and multi-effects processing

Zero-latency direct hardware monitoring w/effects

ASIO2, WDM/MME/DirectSound, x64 Drivers

EDI (E-MU Digital Interface) proprietary 64 channel audio link over CAT-5 cable

Anti-Pop speaker protection minimizes noise during power on/off

Ultra-low jitter clock subsystem: < 1ns in PLL mode (44.1kHz, Opt. S/PDIF Sync)

Analog Line Inputs (4)

Type: servo-balanced, DC-coupled, low-noise input circuitry

A/D converter: AK5394A

Level (software selectable):

Professional: +4dBu nominal, 20dBu max (balanced)

Consumer: -10dBV nominal, 6dBV max (unbalanced)

Frequency Response (20Hz-20kHz): +0.0/-.03dB

Dynamic Range (1kHz, A-weighted): 120dB

Signal-to-Noise Ratio (A-weighted): 120dB

THD+N (1kHz at -1dBFS): -110dB (.0003%)

Stereo Crosstalk (1kHz at -1dBFS): < -120dB

Analog Line Outputs (6)

Type: balanced, AC-coupled, 2-pole low-pass differential filter

D/A converter: CS4398

Level (software selectable):

Professional: +4dBu nominal, 20dBu max (balanced)

Consumer: -10dBV nominal, 6dBV max (unbalanced)

Frequency Response (20Hz - 20kHz): 0.0/-.06dB

Dynamic Range (1kHz, A-weighted): 120dB

Signal-to-Noise Ratio (A-weighted): 120dB

THD+N (1kHz at -1dBFS): -105dB (.0006%)

Stereo Crosstalk (1kHz at -1dBFS): < -115dB

Combo Microphone Preamplifier/Hi-Z/Line Inputs (2)

Type: E-MU XTC combo mic preamp and Hi-Z/line input w/ Soft Limiter

Gain Range: +60dB

Frequency Response (min gain, 20Hz-20kHz): +0.0/-0.1dB

Stereo Crosstalk (1kHz min gain, -1dBFS): < -125dB

Hi-Z Line Input:

Input Impedance: 1Mohm

Max Level: +18dBV (20.2dBu)

Dynamic Range (A-weighted, 1kHz, min gain): 118dB

Signal-to-Noise Ratio (A-weighted, min gain): 118dB

THD+N (1kHz at -1dBFS, min gain): -105dB (.0006%)

Microphone Preamplifier:

Input Impedance: 1.5Kohms

Max Level: +6dBV (+8.2dBu)

EIN (20Hz-20kHz, 150ohm, unweighted): -129.5dBu

Signal-to-Noise Ratio (A-weighted, min gain): 119dB

THD+N (1kHz at -1dBFS, min gain): -110dB (.0003%)

Phantom Power: 48V

Soft Limiter: 5dB max compression (software selectable)

Edited by andrei_tu
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

"This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies.