www.rgc.ro Web analytics

Jump to content

IPSS un modul programabil de comanda pentru aplicatii de switching


AnalogSound
 Share

Recommended Posts

Un proiect la care lucrez de ceva vreme. O placa universala si extrem de configurabila (cred ca acopera cam toate scenariile posibile) - sper ca nu va deranjeaza descrierea in engleza dar nu mai am puterea sa o fac si in romana

 

Technical specifications:
- 8 inputs for switches
- 8 outputs that can supply up to 150mA (each)
- can accept DC or AC as supply voltage (between 6V and 12V DC or AC)
- MIDI IN / OUT / THROUGH (buffered)
- Mute output port for MUTE before switch
- Optional LCD output
- 8 status outputs (can supply LEDs for example)

Configuration specifications:
- For each MIDI PC message can be assigned a combination of active outputs (relays)
- For each of the 8 INPUTS can be assigned a combination of active outputs (relays)
- For each of the 8 INPUTS a maximum of 16 characters name can be assigned (visible on the optional LCD)
- For each of the 8 OUTPUTS can be assigned a MIDI CC number (CC value grater than 0 would activate the output / a CC with a value of 0 would deactivate the output)
- Configurable pre-mute delay and mute delay (each with its own values)
- MIDI channel can be freely configured
- For each of the 8 inputs a MIDI PC message can be assigned to be sent when the input is activated also, a different channel can be assigned for the MIDI PC messages sent by the foot-switches
- In case of not using the MIDI PC send feature, this can be deactivated
- Each of the 8 OUTPUTS can be configured pe be a momentary latch with a custom time between 0 and 255ms (1/4 of a sec)

Utility specifications:
- The ability to erase the board via GUI and reset it to factory defaults
- The ability to save the current configuration of the board
- The ability to restore the saved configuration of the board (for example in case that many boards needs to be configured with the same features)
- Firmware update section - for updating the running firmware of the board or to upload custom firmware (available by request)

All the configuration features are available via a computer GUI (compatible with Windows XP, Windows 7 and Windows 10 / 64 and 32 bits)

Package will be delivered with the control board, programming interface and instructions to download the GUI programming application.

 

 

68463092_2434967203404285_8688355210696851456_o.jpg

69207357_2434967136737625_5374811280685137920_o.jpg

68780109_2432945796939759_3641016700792471552_o.jpg

68454377_2432945820273090_7824988654450769920_n.jpg

  • Like 4
  • Thanks 1
Link to comment
Share on other sites

17 minutes ago, boc said:

Aplicatia de configurare poate fii facuta sa functioneze si pe linux sau web?

Aplicatia la momentul actual ruleaza doar pe Windows - pe web nu cred ca are cum sa functioneze deoarece are nevoie sa acceseze portul Serial pe care il creaza interfata de configurare - deci web din cate stiu este exclus.
Pe Linux nu este dezvoltata inca dar cred ca in WINE poate sa functioneze insa NU este testata.

  • Like 1
Link to comment
Share on other sites

  • 5 months later...

Idee: un modul Bluetooth HC-05 conectat serial la controller sau similar, si aplicatie Android pentru configurare.

Eu am aplicat metoda asta la un proiect facut de mine. Daca ai nevoie de sugestii in legatura cu librariile pt lucrul cu Bluetooth in Android Studio, da-mi un mesaj.

 

Ca o paranteza, si eu tot Linux folosesc pe laptop, dar am si o masina virtuala Windows 7 (VirtualBox) pentru situatii extreme.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

"This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies.